DIN hydraulic hose

DIN hydraulic hose 1.SAE/DIN 2.One to four steel wire spiral layers 3.weather resistance 4.ISO9001:2008

DIN Hydraulic wire hose

Part introduction

This hose consists of an inner tube of oil synthetic rubber, one/two/three/four/six wire braid reinforcement, and an oil and weather resistant synthetic rubber cover.

Hose range suitable to carry hydraulic fluids such as glycol, mineral oils, fuels, lubricants, emulsion, hydrocarbons etc.

Tube : Oil resistant synthetic rubberReinforceent : two high tensile steel wire layersCover : Abrasion and weather resistant synthetic rubberTemperature range : -40 °C to +100 °C

DN	Hose I.D		Hose  O.D	Working Pressure		Burst Pressure		Minimum Bend Radius	Weight
	inch	mm	mm	MPa	psi	MPa	psi	mm	Kg/m
6	1/4	6.4	17.5	40.0	5800	160.0	22840	100	0.42
8	5/16	7.9	19.1	36.0	5250	140.0	20000	114	0.51
10	3/8	9.5	21.4	33.1	4800	132.0	18840	127	0.60
13	1/2	12.7	24.6	27.6	4000	110.0	15720	178	0.74
16	5/8	15.9	27.8	25.0	3625	100.0	14280	200	0.86
19	3/4	19.0	31.8	21.5	3120	85.0	12280	240	1.04
25	1	25.4	39.7	16.5	2400	65.0	9420	300	1.42
32	1.1/4	31.8	50.8	12.5	1820	50.0	7120	419	2.23
38	1.1/2	38.1	57.2	9.0	1310	36.0	5140	500	2.74
51	2	50.8	69.8	8.0	1160	32.0	4560	630	3.50

DIN hydraulic hose